The ISO Standard Glossary

ISO 9000 to ISO 9999
ISO 9000:2000Quality management systems. Fundamentals and vocabulary
ISO 9000-1:1994Quality management and quality assurance standards. Guidelines for selection and use
ISO 9000-2:1997Quality management and quality assurance standards. Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
ISO 9000-3:1997Quality management and quality assurance standards. Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software
ISO 9001:1994Quality systems. Model for quality assurance in design, development, production, installation and servicing
ISO 9001:2000Quality management systems. Requirements
ISO 9001:2000 (A5 Laminated)Quality management systems. Requirements
ISO 9002:1994Quality systems. Model for quality assurance in production, installation and servicing
ISO 9003:1994Quality systems. Model for quality assurance in final inspection and test
ISO 9004:2000Quality management systems. Guidelines for performance improvements
ISO 9013:2002Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
ISO 9019:1995Securities. Numbering of certificates
ISO 9020:1998Binders for paints and varnishes. Determination of free-formaldehyde content of amino resins. Sodium sulfite titrimetric method
ISO 9022-1:1994Optics and optical instruments. Environmental test methods. Definitions, extent of testing
ISO 9022-2:2002Optics and optical instruments. Environmental test methods. Cold, heat and humidity
ISO 9022-3:1998Optics and optical instruments. Environmental test methods. Mechanical stress
ISO 9022-4:2002Optics and optical instruments. Environmental test methods. Salt mist
ISO 9022-5:1994Optics and optical instruments. Environmental test methods. Combined cold, low air pressure
ISO 9022-6:1994Optics and optical instruments. Environmental test methods. Dust
ISO 9022-7:1994Optics and optical instruments. Environmental test methods. Drip, rain
ISO 9022-8:1994Optics and optical instruments. Environmental test methods. High pressure, low pressure, immersion
ISO 9022-9:1994Optics and optical instruments. Environmental test methods. Solar radiation
ISO 9022-10:1998Optics and optical instruments. Environmental test methods. Combined sinusoidal vibration and dry heat or cold
ISO 9022-11:1994Optics and optical instruments. Environmental test methods. Mould growth
ISO 9022-12:1994Optics and optical instruments. Environmental test methods. Contamination
ISO 9022-13:1998Optics and optical instruments. Environmental test methods. Combined shock, bump or free fall and dry heat or cold
ISO 9022-14:1994Optics and optical instruments. Environmental test methods. Dew, hoarfrost, ice
ISO 9022-15:1998Optics and optical instruments. Environmental test methods. Combined digitally controlled broad-band random vibration and dry heat or cold
ISO 9022-16:1998Optics and optical instruments. Environmental test methods. Combined bounce or steady-state acceleration and dry heat or cold
ISO 9022-17:1994Optics and optical instruments. Environmental test methods. Combined contamination, solar radiation
ISO 9022-18:1994Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
ISO 9022-19:1994Optics and optical instruments. Environmental test methods. Temperature cycles combined with sinusoidal or random vibration
ISO 9022-20:1997Optics and optical instruments. Environmental test methods. Humid atmosphere containing sulfur dioxide or hydrogen sulfide
ISO 9022-21:1998Optics and optical instruments. Environmental test methods. Combined low pressure and ambient temperature or dry heat
ISO 9029:1997Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method
ISO 9038:2002Test for sustained combustibility of liquids
ISO 9039:1994Optics and optical instruments. Quality evaluation of optical systems. Determination of distortion
ISO/IEC 9040:1997Information technology. Open systems interconnection. Virtual terminal basic class service
ISO/IEC 9041-1:1997Information technology. Open systems interconnection. Virtual terminal basic class protocol. Specification
ISO/IEC 9041-2:1997Information technology. Open systems interconnection. Virtual terminal basic class protocol. Protocol implementation conformance statement (PICS) proforma
ISO 9044:1999Industrial woven wire cloth. Technical requirements and testing
ISO 9047:2003Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at variable temperatures
ISO 9054:1999Cellular plastics, rigid. Test methods for self-skinned high-density materials
ISO 9056:1990Glass containers. Series of pilferproof finish. Dimensions
ISO 9057:1991Glass containers. 28 mm tamper-evident finish for pressurized liquids. Dimensions
ISO 9058:1992Glass containers. Tolerances
ISO/IEC 9066-3:1996Information processing systems. Text communication. Reliable transfer. Protocol Implementation Conformance Statement (PICS) proforma
ISO 9073-2:1997Textiles. Test methods for nonwovens. Determination of thickness
ISO 9073-4:1997Textiles. Test methods for nonwovens. Determination of tear resistance
ISO 9073-6:2000Textiles. Test methods for nonwovens. Absorption
ISO 9073-7:1998Textiles. Test methods for nonwovens. Determination of bending length
ISO 9073-8:1998Textiles. Test methods for nonwovens. Determination of liquid strike-through time (simulated urine)
ISO 9073-9:1998Textiles. Test methods for nonwovens. Determination of drape coefficient
ISO 9073-11:2002Textiles. Test methods for nonwovens. Run-off
ISO 9073-12:2002Textiles. Test methods for nonwovens. Demand absorbency
ISO/IEC 9075-9:2001Information technology. Database languages. SQL. Information technology. Database Languages. SQL. Management of external data (SQL/MED)
ISO/IEC 9075-10:2000Information technology. Database languages. SQL. Object Language Bindings (SQL/OLB)
ISO/IEC 9075-13:2002Information technology. Database languages. SQL. SQL routines and types using the Java programming language (SQL/JRT)
ISO 9080:2003Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9083:2001Calculation of load capacity of spur and helical gears. Application to marine gears
ISO 9084:2000Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements
ISO 9085:2002Calculation of load capacity of spur and helical gears. Application for industrial gears
ISO 9093-1:1998Small craft. Seacocks and through-hull fittings. Metallic
ISO 9093-2:2002Small craft. Seacocks and through-hull fittings. Non-metallic
ISO 9094-1:2003Small craft. Fire protection. Craft with a hull length of up to and including 15 m
ISO 9094-2:2002Small craft. Fire protection. Craft with a hull length of over 15 m
ISO 9096:2003Stationary source emissions. Manual determination of mass concentration of particulate matter
ISO 9097:1995Small craft. Electric fans
ISO 9102:1997Diesel engines. Screw-in injection nozzle holders types 24, 25, 26 and 26.1
ISO TR 9122-2:1990Toxicity testing of fire effluents. Guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology
ISO TR 9122-3:1993Toxicity testing of fire effluents. Methods for the analysis of gases and vapours in fire effluents
ISO TR 9122-4:1993Toxicity testing of fire effluents. The fire model (furnaces and combustion apparatus used in small-scale testing)
ISO TR 9122-5:1993Toxicity testing of fire effluents. Prediction of toxic effects of fire effluents
ISO TR 9122-6:1994Toxicity testing of fire effluents. Guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport
ISO 9123:2001Measurement of liquid flow in open channels. Stage-fall-discharge relationships
ISO/IEC 9126-1:2001Information technology. Software product quality. Quality model
ISO 9136-2:2000Abrasive grains. Determination of bulk density. Microgrits
ISO 9144:1991Securities. Optical character recognition line. Position and structure
ISO 9163:1999Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 9167-1:1995Rapeseed. Determination of glucosinolates content. Method using high-performance liquid chromatography
ISO 9167-2:1997Rapeseed. Determination of glucosinolates content. Method using X-ray fluorescence spectrometry
ISO 9173-1:1996Dental extraction forceps. Screw and pin joint types
ISO 9186:2001Graphical symbols. Test methods for judged comprehensibility and for comprehension
ISO 9187-1:2003Injection equipment for medical use. Ampoules for injectables
ISO 9187-2:1999Injection equipment for medical use. One-point-cut (OPC) ampoules
ISO 9197:1998Paper, board and pulps. Determination of water-soluble chlorides
ISO 9198:2001Paper, board and pulp. Determination of water-soluble sulfates
ISO 9207:1995Manually portable chain-saws with internal combustion engine. Determination of sound power levels. Engineering method (grade 2)
ISO 9211-1:1994Optics and optical instruments. Optical coatings. Definitions
ISO 9211-2:1994Optics and optical instruments. Optical coatings. Optical properties
ISO 9211-3:1994Optics and optical instruments. Optical coatings. Environmental durability
ISO 9211-4:1996Optics and optical instruments. Optical coatings. Specific test methods
ISO 9220:1995Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
ISO 9222-1:1995Technical drawings. Seals for dynamic application. General simplified representation
ISO 9222-2:1995Technical drawings. Seals for dynamic application. Detailed simplified representation
ISO 9230:1991Information and documentation. Determination of price indexes for books and serials purchased by libraries
ISO 9232:2003Yogurt. Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
ISO 9236-3:1999Photography. Sensitometry of screen/film systems for medical radiography. Determination of sensitometric curve shape, speed and average gradient for mammography
ISO 9237:1995Textiles. Determination of the permeability of fabrics to air
ISO 9239-1:2002Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Determination of the burning behaviour using a radiant heat source
ISO 9241-1:1997Ergonomic requirements for office work with visual display terminals (VDTs). General introduction
ISO 9241-4:1998Ergonomic requirements for office work with visual display terminals (VDTs). Keyboard requirements
ISO 9241-5:1999Ergonomic requirements for office work with visual display terminals (VDTs). Workstation layout and postural requirements
ISO 9241-6:2000Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on the work environment
ISO 9241-7:1998Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for display with reflections
ISO 9241-8:1998Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for displayed colours
ISO 9241-9:2000Ergonomic requirements for office work with visual display terminals (VDTs). Requirements for non-keyboard input devices
ISO 9241-10:1996Ergonomic requirements for office work with visual display terminals (VDTs). Dialogue principles
ISO 9241-11:1998Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on usability
ISO 9241-12:1999Ergonomic requirements for office work with visual display terminals (VDTs). Presentation of information
ISO 9241-13:1999Ergonomic requirements for office work with visual display terminals (VDTs). User guidance
ISO 9241-14:2000Ergonomic requirements for office work with visual display terminals (VDTs). Menu dialogues
ISO 9241-15:1998Ergonomic requirements for office work with visual display terminals (VDTs). Command dialogues
ISO 9241-16:1999Ergonomic requirements for office work with visual display terminals (VDTs). Direct manipulation dialogues
ISO 9241-17:1998Ergonomic requirements for office work with visual display terminals (VDTs). Form-filling dialogues
ISO 9251:1996Thermal insulation. Heat transfer. Conditions and properties of materials. Vocabulary
ISO 9276-1:1998Representation of results of particle size analysis. Graphical representation
ISO 9276-2:2001Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-4:2001Representation of results of particle size analysis. Characterization of a classification process
ISO/IEC 9281-1:1990Information technology. Picture coding methods. Identification
ISO/IEC 9281-2:1990Information technology. Picture coding methods. Procedure for registration
ISO 9282-1:1988Information processing. Coded representation of pictures. Encoding principles for picture representation in a 7-bit or 8-bit environment
ISO 9283:1998Manipulating industrial robots. Performance criteria and related test methods
ISO 9285:1997Abrasive grains and crude. Chemical analysis of fused aluminium oxide
ISO 9286:1997Abrasive grains and crude. Chemical analysis of silicon carbide
ISO 9288:1996Thermal insulation. Heat transfer by radiation. Physical quantities and definitions
ISO 9289:1995Oilseed residues. Determination of free residual hexane
ISO/IEC TR 9294:1990Information technology. Guidelines for the management of software documentation
ISO 9300:1995Measurement of gas flow by means of critical flow Venturi nozzles
ISO 9308-1:2000Water quality. Detection and enumeration of $7IEscherichia Coli$7R and coliform bacteria in surface and waste water. Membrane filtration method
ISO 9308-3:1999Water quality. Detection and enumeration of $7IEscherichia Coli$7R and coliform bacteria in surface and waste water. Miniaturized method (most probable number) for the detection and enumeration of $7IE. coli$7R in surface and waste water
ISO 9311-2:2002Adhesives for thermoplastic piping systems. Determination of shear strength
ISO 9312:1995Resistance welding equipment. Insulated pins for use in electrode back-ups
ISO/IEC 9314-5:1995Information processing systems. Fibre Distributed Data Interface (FDDI). Hybrid Ring Control (HRC)
ISO/IEC 9314-6:1998Information processing systems. Fibre Distributed Data Interface (FDDI). Station management (SMT)
ISO/IEC 9314-7:1998Information processing systems. Fibre Distributed Data Interface (FDDI). Physical layer protocol (PHY-2)
ISO/IEC 9314-8:1998Information processing systems. Fibre Distributed Data Interface (FDDI). Media access control-2 (MAC-2)
ISO 9334:1995Optics and optical instruments. Optical transfer function. Definitions and mathematical relationships
ISO 9335:1995Optics and optical instruments. Optical transfer function. Principles and procedures of measurement
ISO 9336-1:1994Optics and optical instruments. Application. Optical transfer function. Interchangeable lenses for 35 mm still cameras
ISO 9336-2:1994Optics and optical instruments. Application. Optical transfer function. Lenses for office copiers
ISO 9336-3:1994Optics and optical instruments. Application. Optical transfer function. Telescopes
ISO 9337-1:2001Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing
ISO 9338:1998Optics and optical instruments. Contact lenses. Determination of the diameters
ISO 9339-1:1998Optics and optical instruments. Contact lenses. Determination of the thickness. Rigid contact lenses
ISO 9339-2:1998Optics and optical instruments. Contact lenses. Determination of the thickness. Hydrogel contact lenses
ISO 9340:1999Optics and optical instruments. Contact lenses. Determination of strains for rigid contact lenses
ISO 9341:1998Optics and optical instruments. Contact lenses. Determination of inclusions and surface imperfections for rigid contact lenses
ISO 9342:1998Optics and optical instruments. Test lenses for calibration of focimeters
ISO 9345-2:2003Optics and optical instruments. Microscopes. Imaging distances related to mechanical reference planes. Infinity-corrected optical systems
ISO 9346:1996Thermal insulation. Mass transfer. Physical quantities and definitions
ISO 9358:1994Optics and optical instruments. Veiling glare of image forming systems. Definitions and methods of measurement
ISO 9360-1:2000Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with minimum tidal volumes of 250 ml
ISO 9360-2:2002Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
ISO 9362:1994Banking. Banking telecommunication messages. Bank identifier codes
ISO 9363-1:1999Optics and optical instruments. Contact lenses. Determination of cytotoxicity of contact lens material. Agar overlay test and growth inhibition test
ISO 9370:1997Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
ISO 9377-2:2000Water quality. Determination of hydrocarbon oil index. Method using solvent extraction and gas chromatography
ISO 9391:1995Water quality. Sampling in deep water for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers
ISO 9394:1998Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes
ISO 9396:2001Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus
ISO 9397:1997Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method
ISO 9398-1:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Flatwork ironing machines
ISO 9398-2:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Batch drying tumblers
ISO 9398-3:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washing tunnels
ISO 9398-4:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washer-extractors
ISO 9400:1996Nickel-based alloys. Determination of resistance to intergranular corrosion
ISO 9403:2000Crude petroleum. Transfer accountability. Guidelines for cargo inspection
ISO 9408:1999Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer
ISO 9409-1:1997Manipulating industrial robots. Mechanical interfaces. Plates (form A)
ISO 9409-2:1997Manipulating industrial robots. Mechanical interfaces. Shafts (form A)
ISO 9431:1999Construction drawings. Spaces for drawing and for text, and title blocks on drawing sheets
ISO 9439:2001Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Carbon dioxide evolution test
ISO 9454-2:2001Soft soldering fluxes. Classification and requirements. Performance requirements
ISO 9455-2:1996Soft soldering fluxes. Test methods. Determination of non-volatile matter, ebulliometric method
ISO 9455-3:1995Soft soldering fluxes. Test methods. Determination of acid value, potentiometric and visual titration methods
ISO 9455-6:1997Soft soldering fluxes. Test methods. Determination and detection of halide (excluding fluoride) content
ISO 9455-9:1996Soft soldering fluxes. Test methods. Determination of ammonia content
ISO 9455-10:2001Soft soldering fluxes. Test methods. Flux efficacy test, solder spread method
ISO 9455-12:1994Soft soldering fluxes. Test methods. Steel tube corrosion test
ISO 9455-13:2000Soft soldering fluxes. Test methods. Determination of flux spattering
ISO 9455-15:2000Soft soldering fluxes. Test methods. Copper corrosion test
ISO 9455-16:2001Soft soldering fluxes. Test methods. Flux efficacy tests, wetting balance method
ISO 9455-17:2002Soft soldering fluxes. Test methods. Surface insulation resistance comb test and electrochemical migration test of flux residues
ISO 9456:1997Optics and optical instruments. Opthalmic optics. Marking of spectacle frames
ISO 9462:1993Alpine ski-bindings. Safety requirements and test methods
ISO TR 9464:1998Guide to the use of ISO 5167-1:1991
ISO 9488:2000Solar energy. Vocabulary
ISO/TR 9494:1997Petroleum liquids. Automatic pipeline sampling. Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids
ISO/IEC 9496:1995CCITT high level language (CHILL)
ISO 9509:1995Water quality. Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water
ISO 9512:2002Cigarettes. Determination of ventilation. Definitions and measurement principles
ISO 9513:2002Metallic materials. Calibration of extensometers used in uniaxial testing
ISO 9514:1995Paints and varnishes. Determination of the pot-life of liquid systems. Preparation and conditioning of samples and guidelines for testing
ISO 9518:1998Forestry machinery. Portable chain-saws. Kickback test
ISO/IEC 9529-1:1989Information processing systems. Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side. Dimensional, physical and magnetic characteristics
ISO/IEC 9529-2:1989Information processing systems. Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side. Track format
ISO/IEC 9541-1:1991Information technology. Font information interchange. Architecture
ISO/IEC 9541-2:1991Information technology. Font information interchange. Interchange format
ISO/IEC 9541-3:1994Information technology. Font information interchange. Glyph shape representation
ISO/IEC 9545:1994Information technology. Open Systems Interconnection. Application Layer structure
ISO TR 9547:1988Programming language processors. Test methods. Guidelines for their development and acceptability
ISO/IEC 9548-1:1996Information technology. Open systems interconnection. Connectionless session protocol. Protocol specification
ISO/IEC 9548-2:1995Information technology. Open systems interconnection. Connectionless session protocol. Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 9549:1990Information technology. Galvanic isolation of balanced interchange circuits
ISO 9556:2001Steel and iron. Determination of total carbon content. Infrared absorption method after combustion in an induction furnace
ISO 9568:1993Cinematography. Background acoustic noise levels in the theatres, review rooms and dubbing rooms
ISO/IEC TR 9573-11:1992Information processing. SGML support facilities. Techniques for using SGML. Application at ISO Central Secretariat for International Standards and Technical Reports
ISO/IEC TR 9573-13:1991Information processing. SGML support facilities. Techniques for using SGML. Public entity sets for mathematics and science
ISO/IEC 9574:1992Information technology. Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
ISO/IEC 9576-1:1995Information technology. Open systems interconnection. Connectionless presentation protocol. Protocol specification
ISO/IEC 9576-2:1995Information technology. Open systems interconnection. Connectionless presentation protocol. Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC TR 9577:1996Information technology. Protocol identification in the network layer
ISO/IEC TR 9578:1990Information technology. Communication interface connectors used in local area networks
ISO/IEC 9579:2000Information technology. Remote database access for SQL with security enhancement
ISO 9587:1999Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO 9588:1999Metallic and other inorganic coatings. Post-coating treatments of iron and steel to reduce the risk of hydrogen embrittlement
ISO/IEC 9593-1:1990Information technology. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS) language bindings. FORTRAN
ISO/IEC 9593-3:1990Information technology. Computer graphics. Programmer's hierarchical interactive graphics system (PHIGS) language bindings. Ada
ISO/IEC 9594-1:1995Information technology. Open systems interconnection. Overview of concepts, models and services
ISO/IEC 9594-2:1995Information technology. Open systems interconnection. Models
ISO/IEC 9594-3:1995Information technology. Open systems interconnection. Abstract service definition
ISO/IEC 9594-4:1995Information technology. Open systems interconnection. The directory. Procedures for distributed operation
ISO/IEC 9594-5:1995Information technology. Open systems interconnection. The directory. Protocol specifications
ISO/IEC 9594-6:1995Information technology. Open systems interconnection. The directory. Selected attribute types
ISO/IEC 9594-7:1995Information technology. Open systems interconnection. The directory. Selected object classes
ISO/IEC 9594-8:1995Information technology. Open systems interconnection. The directory. Authentication framework
ISO/IEC 9594-9:1995Information technology. Open systems interconnection. Replication
ISO/IEC 9595:1991Information technology. Open Systems Interconnection. Common management information service definition
ISO 9606-3:1999Approval testing of welders. Fusion welding. Copper and copper alloys
ISO 9606-4:1999Approval testing of welders. Fusion welding. Nickel and nickel alloys
ISO 9606-5:2000Approval testing of welders. Fusion welding. Titanium and titanium alloys, zirconium and zirconium alloys
ISO 9611:1996Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted
ISO 9614-1:1995Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points
ISO 9614-2:1997Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement by scanning
ISO 9614-3:2002Acoustics. Determination of sound power levels of noise sources using sound intensity. Precision method for measurement by scanning
ISO 9622:1999Whole milk. Determination of milkfat, protein and lactose content. Guidance on the operation of mid-infrared instruments
ISO 9626:1995Stainless steel needle tubing for the manufacture of medical devices
ISO 9633:2001Cycle chains. Characteristics and test methods
ISO/IEC 9636-1:1991Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Overview, profiles, and conformance
ISO/IEC 9636-2:1991Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Control
ISO/IEC 9636-3:1991Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Output
ISO/IEC 9636-4:1991Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Segments
ISO/IEC 9636-5:1991Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Input and echoing
ISO/IEC 9636-6:1991Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional specification. Raster
ISO/IEC 9637-1:1994Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Data stream binding. Character encoding
ISO/IEC 9637-2:1992Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Data stream binding. Binary encoding
ISO/IEC 9638-3:1994Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Language bindings. Ada
ISO/IEC 9646-3:1998Information technology. Open systems interconnection. Conformance testing methodology and framework. The Tree and tabular combined notation (TTCN)
ISO 9653:2000Adhesives. Test method for shear strength of adhesive bonds (ISO 9653:1998)
ISO/IEC 9661:1997Information technology. Data interchange on 12,7 mm wide magnetic tape cartridges. 18 tracks, 1 491 data bytes per millimetre
ISO 9664:1995Adhesives. Test methods for fatigue properties of structural adhesives in tensile shear
ISO 9665:2000Adhesives. Animal glues. Methods of sampling and testing (ISO 9665:1998)
ISO 9667:1998Aircraft ground support equipment. Tow bars
ISO 9669:1990Series 1 freight containers. Interface connections for tank containers
ISO 9680:1996Specification for dental operating light
ISO 9687:1996Dental equipment. Graphical symbols
ISO 9692-2:1998Welding and allied processes. Joint preparation. Submerged arc welding of steels
ISO 9692-3:2001Welding and allied processes. Joint preparation. Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
ISO 9692-4:2003Welding and allied processes. Joint preparation. Clad steels
ISO 9693:2000Metal-ceramic dental restorative systems
ISO 9694:1999Dental phosphate-bonded casting investments
ISO 9702:1999Plastics. Amine epoxide hardeners. Determination of primary, secondary and tertiary amine group nitrogen content
ISO 9703-3:1999Anaesthetic and respiratory care alarm signals. Guidance on application of alarms
ISO TR 9705-2:2001Reaction to fire tests. Full scale room tests for surface products. Technical background and guidance
ISO 9706:2000Information and documentation. Paper for documents. Requirements for permanence
ISO 9707:1995Information and documentation. Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
ISO 9711-1:1990Freight containers. Information related to containers on board vessels. Bay plan system
ISO 9711-2:1990Freight containers. Information related to containers on board vessels. Telex data transmission
ISO 9735-1:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules common to all parts
ISO 9735-2:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to batch EDI
ISO 9735-3:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to interactive EDI
ISO 9735-4:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax and service report message for batch EDI (message type - CONTRL)
ISO 9735-5:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
ISO 9735-6:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Secure authentication and acknowledgement message (message type AUTACK)
ISO 9735-7:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (confidentiality)
ISO 9735-8:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Associated data in EDI
ISO 9735-9:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security key and certificate management message (message type KEYMAN)
ISO 9735-10:2002Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax service directories
ISO 9736:2000Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads
ISO 9737:2000Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads
ISO 9738:2000Turnbarrels, for aircraft control wire rope. Dimensions and loads
ISO 9747:2000Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
ISO 9748:2000Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
ISO 9749:2000Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
ISO 9757:2000Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads
ISO 9758:2000Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads
ISO 9759:2000Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
ISO 9760:2000Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads
ISO 9761:2000Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles. Dimensions
ISO 9762:2000Aircraft control wire rope assemblies. Dimensions and end-fitting combinations
ISO 9771:1997Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
ISO 9772:2001Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
ISO 9773:1999Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
ISO 9785:2002Ship and marine technology. Ventilation of cargo spaces where vehicles with internal combustion engines are driven. Calculation of theoretical total airflow required
ISO 9787:1999Manipulating industrial robots. Coordinate systems and motion nomenclatures
ISO/IEC 9796:1991Information technology. Security techniques. Digital signature scheme giving message recovery
ISO/IEC 9796-2:2002Information technology. Security techniques. Digital signature schemes giving message recovery. Integer factorization based mechanisms
ISO/IEC 9797:1994Information technology. Security techniques. Data integrity mechanism using a cryptographic check function employing a block cipher algorithm
ISO/IEC 9797-2:2002Information technology. Security techniques. Message authentication codes (MACs). Mechanisms using a dedicated hash-function
ISO/IEC 9798-1:1997Information technology. Security techniques. Entity authentication mechanisms. General
ISO/IEC 9798-2:1999Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using symmetric encipherment algorithms
ISO/IEC 9798-3:1998Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using digital signature techniques
ISO/IEC 9798-4:1995Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using a cryptographic check function
ISO/IEC 9798-5:1999Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using zero knowledge techniques
ISO 9801:1999Ophthalmic instruments. Trial case lenses
ISO 9802:1996Raw optical glass. Vocabulary
ISO/IEC 9804:1998Information technology. Open systems interconnection. Service definition for the commitment, concurrency and recovery service element
ISO/IEC 9805-1:1998Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service element. Protocol specification
ISO/IEC 9805-2:1996Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service element. Protocol implementation conformance statement (PICS) proforma
ISO 9831:1998Animal feeding stuffs, animal products, and faeces or urine. Determination of gross calorific value. Bomb calorimeter method
ISO 9832:2003Animal and vegetable fats and oils. Determination of residual technical hexane content
ISO 9838:1991Alpine ski-bindings. Test soles for ski-binding tests
ISO 9843:2002Oil of cedarwood, Chinese type ($7ICupressus funebris$7R, Endlicher)
ISO 9849:2000Optics and optical instruments. Geodetic and surveying instruments. Vocabulary
ISO 9856:1996Conveyor belts. Determination of elastic modulus
ISO 9863-2:1996Geotextiles and geotextile-related products. Determination of thickness at specified pressures. Procedure for determination of thickness of single layers of multilayer products
ISO 9873:2000Dental hand instruments. Reusable mirrors and handles
ISO 9875:2002Ships and marine technology. Marine echo-sounding equipment
ISO 9876:1995Specification for marine facsimile receivers for meteorological charts
ISO 9876:1999Ships and marine technology. Marine facsimile receivers for meteorological charts
ISO 9886:2001Evaluation of thermal strain by physiological measurements
ISO 9887:1995Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Semi-continuous activated sludge method (SCAS)
ISO 9888:1999Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Static test (Zahn-Wellens method)
ISO 9897:1997Freight containers. Container equipment data exchange (CEDEX). General communication codes
ISO 9898:2000Equipment for crop protection. Test methods for air-assisted sprayers for bush and tree crops
ISO/IEC 9899:1999Programming languages. C
ISO 9902-1:2001Textile machinery. Noise test code. Common requirements
ISO 9902-2:2001Textile machinery. Noise test code. Spinning preparatory and spinning machinery
ISO 9902-3:2001Textile machinery. Noise test code. Nonwoven machines
ISO 9902-4:2001Textile machinery. Noise test code. Yarn processing, cordage and rope manufacturing machines
ISO 9902-5:2001Textile machinery. Noise test code. Weaving and knitting preparatory machinery
ISO 9902-6:2001Textile machinery. Noise test code. Fabric manufacturing machines
ISO 9902-7:2001Textile machinery. Noise test code. Dyeing and finishing machines
ISO 9903-1:2003Textile machinery and accessories. Main dimensions for section wires for metallic card clothing. Foot without interlocking or interchaining
ISO 9903-2:2003Textile machinery and accessories. Main dimensions for section wires for metallic card clothing. Foot with interchaining
ISO 9905:1998Technical specifications for centrifugal pumps. Class I
ISO 9906:2000Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1 and 2
ISO 9908:1998Technical specifications for centrifugal pumps. Class III
ISO 9913-1:1998Optics and optical instruments. Contact lenses. Determination of oxygen permeability and transmissibility by the FATT method
ISO 9913-2:2000Optics and optical instruments. Contact lenses. Determination of oxygen permeability and transmissibility by the coulometric method
ISO 9914:1997Optics and optical instruments. Contact lenses. Determination of refractive index of contact lens materials
ISO 9917-2:2000Dental water-based cements. Light-activated cements
ISO 9920:1995Ergonomics of the thermal environment. Estimation of the thermal insulation and evaporative resistance of a clothing ensemble
ISO 9921-1:1996Ergonomic assessment of speech communication. Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)
ISO 9923:1994Micrographics. Transparent A6 microfiche. Image arrangements
ISO 9924-1:2000Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
ISO 9924-2:2000Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrile-butadiene and halobutyl rubbers
ISO 9934-1:2001Non-destructive testing. Magnetic particle testing. General principles
ISO 9934-2:2002Non-destructive testing. Magnetic particle testing. Detection media
ISO 9934-3:2002Non-destructive testing. Magnetic particle testing. Equipment
ISO 9944:1995Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts
ISO/IEC 9945-1:2002Information technology. Portable operating system interface (POSIX). Base Definitions
ISO/IEC 9945-2:2002Information technology. Portable operating system interface (POSIX). System Interfaces
ISO/IEC 9945-3:2002Information technology. Portable operating system interface (POSIX). Shell and utilities
ISO/IEC 9945-4:2002Information technology. Portable operating system interface (POSIX). Rationale
ISO 9946:1999Manipulating industrial robots. Presentation of characteristics
ISO 9947:1991Textile machinery and accessories. Two-for-one twisters. Vocabulary
ISO 9956-10:1997Specification and approval of welding procedures for metallic materials. Welding procedure specification for electron beam welding
ISO 9956-11:1997Specification and approval of welding procedures for metallic materials. Welding procedure specification for laser beam welding
ISO 9963-1:1996Water quality. Determination of alkalinity. Determination of total and composite alkalinity
ISO 9963-2:1996Water quality. Determination of alkalinity. Determination of carbonate alkalinity
ISO 9967:1995Thermoplastics pipes. Determination of creep ratio
ISO 9969:1995Thermoplastics pipes. Determination of ring stiffness
ISO/IEC 9973:1994Information technology. Computer graphics and image processing. Procedures for registration of graphical items
ISO 9974-1:2000Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Threaded ports
ISO 9974-2:2000Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Stud ends with elastomeric sealing (type E)
ISO 9974-3:2000Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Stud ends with metal-to-metal sealing (type B)
ISO/IEC 9979:1999Information technology. Security techniques. Procedures for the registration of cryptographic algorithms
ISO 9981:1998Belt drives. Pulleys and V-ribbed belts for the automotive industry. PK profile:dimensions
ISO 9982:1998Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles. Dimensions
ISO/IEC 9983:1989Information processing systems. Designation of unrecorded flexible disk cartridges
ISO 9988-1:1998Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Designation system and basis for specifications
ISO 9988-2:1999Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 9994:2002Lighters. Safety specification
ISO 9997:2000Dental cartridge syringes
ISO 9999:2002Technical aids for persons with disabilities. Classification and terminology